If you are on Windows using the WSL method make sure to pass through the usb device to wsl first by following this guide
First run the
lsusb command to see the current devices attached to your linux host
Here we'll use a phone attached to the host:
Bus 002 Device 003: ID 18d1:4e11 Google Inc. Nexus One
(Note the Bus and device numbers).
Now, add this line to the
args section of
basic.sh, replacing the
hostaddr with the values you got earlier
-usb -device usb-host,hostbus=2,hostaddr=3 \
Thats it! You should be good to go.